H300/H300R LED headlamp

LED:
CREE XHP50.2 Cool White 6500K / Neutral White 5000K
CREE High CRI J2 90 CRI 5000K / CREE XHP50.3 HI 6500K
Nichia 144ART R9050 sm453 4500K

Max output:
XHP50.2 HD CW  & NW : ANSI 2200 Lumens / 2500 LED Lumens
XHP50.3 HI CW : ANSI 2050 Lumens
XHP50.2 HD Ra 90  : ANSI 1800 Lumens
144ART R9050 : ANSI  1500 Lumens

Max beam distance:
H300R: 9500cd (HI CW) / 6600cd (HD CW/NW) / 6000cd (HD Ra90)
H300: 4500cd (144ART) / 6000cd (HD CW/NW) / 5500cd (HD Ra90)

Max peak beam intensity:
H300R: 195 m (HI CW) / 162 m (HD CW/NW) / 155 m (HD Ra90)
H300: 134 m (144ART) / 155 m (HD CW/NW) / 148 m (HD Ra90)

Waterproof: IPX-8
Impact resistant: 1 Meter
Battery: 1×18650 , 2x CR123A
Rated Range: 2.7V ~ 8.4V
Weight: 54g / 1.90 oz (without battery)
Dimension:
Length 104.7mm(4.12 inch)
Head diameter 25.2mm (0.99 inch) /Body diameter 21.6mm(0.85 inch)

Nichia 144 & CREE XHP50.2 High CRI LED available !

H300 UI

H300 / H300R Led headlamp / Flashlight

LED:
CREE XHP50.2 Cool White K4 6500K  Neutral White K2 5000K / High CRI J2 5000K / XHP50.3 HI 6500K
Nichia 144AR 4500K 90 CRI

Max output:
XHP50.2 HD CW/NW: ANSI 2200 Lumens / 2500 LED Lumens
XHP50.3 HI CW: ANSI 2050 Lumens
XHP50.2 HD Ra 90 : ANSI 1800 Lumens
144ART R9050: ANSI  1500 Lumens

Max beam distance:
H300R: 9500cd (HI CW) / 6600cd (HD CW/NW) / 6000cd (HD Ra90)
H300: 4500cd  144ART) / 6000cd (HD CW/NW) / 5500cd (HD Ra90)

Max peak beam intensity:
H300R: 195 meters (HI CW) / 162 meters (HD CW/NW) / 155 meters (HD Ra90)
H300: 134 meters  144ART) / 155 meters (HD CW/NW) / 148 meters (HD Ra90)

Waterproof: IPX-8
Impact resistant: 1 Meter
Battery: 1×18650 , 2x CR123A
Rated Range: 2.7V ~ 8.4V

Dimension:
Length 104.7mm / 4.12 inch
Head diameter 25.2mm / 0.99 inch
Body diameter 21.6mm/0.85 inch

Weight: 54g / 1.90 oz (without battery)

Accessories: Headband, clip, lanyard, magnet replace rubber pad, Operator’s manual, Spare O-ring

Battery installation
Please make sure that the positive pole of the battery points to the head of the flashlight when you replace the battery.

How to use

Turn ON/OFF & Mode transfer

When the flashlight was OFF status:
Click switch to Common used (H-M1-M2) mode.
Quickly double click switch to Turbo(T1/T2) mode.
Quickly triple click switch to Strobe(S1/S2/S3) mode.
Hold press switch 0.5 second to Low(L1/L2) mode.

When the flashlight was ON(any mode) status:
Click switch to turn off.

When the flashlight was on ( T1/T2, H/M1/M2, L1/L2 )
Press and hold the switch to automatically cycle, the level is selected when the side switch has been released, turn off memorized.

When the flashlight was on (H/M1/M2, L1/L2 )
Quickly double clicks switch tranfer Common used mode(H/M1/M2) to Trubo(T1/T2), repeat quickly
double clicks switch back to Common used mode(H/M1/M2)
Quickly triple clicks switch transfer Strobe mode, repeat quickly triple clicks switch back to previous mode.
When the flashlight was ON (S1/S2/S3)
Quickly double clicks switch tranfer S1-S2-S3, turn off memorized.

Location indicator & Lock-out function

when turn off the flashlight, quickly click switch 4 times, location indicator switch on and lock-out function
activation at same time,the indicator light flash every second. Double clicks can switch the indicator on/off,
Quickly click switch 4 times, switch button unlock and enter into Low(L1) mode.

Power indicator & Low voltage indication

Every time turn on , the side indicator will be light 5 seconds to display the battery power.

Blue light constant on: 100%~80% ,
Blue light blinks: 80%~50% ,
Red light constant on: 50%~20% ,
Red light blinks: 20%~0.

When the battery voltage drops below 3.0V, the indicator flashes twice every 2 seconds.
When the battery voltage drops below 2.7V, the light will turn off.

Charging instructions :
In charging, the red indicator constant light on, when battery almost full charge,indicator change to constant blue light.

Features

1.Super bright & latest CREE XHP50.2 LED, Max 2500 LED lumens. High-Performance, High-Efficiency and energy conservation.
2.New U.D.O.C Reflector. Increased reflectivity over 10%., Efficiency reflection, perfect beamshot, excellent structure and temperature resistance.
3.Rugged indestructible aluminum body with anti-scratching type III hard anodization
4.Multi-level dissipating heat design and copper starboard, excellent heat dissipation. Flashlight head integrated construction, high thermal conductivity.
5.Side switch button to transferring mode, user-friendly interface to adjust output.
6.Intelligent dynamic detection of voltage to balance and adjust brightness, safe and efficient use.
7.Wide input range provides more choices of batteries. High efficiency driver circuit, no visible flash in any mode.
8.Automatic memory function, remember last used setting and can be preset to specific output mode for instant access.
9.Intelligent temperature control technology for flashlight stable and safe use.
10.Reverse polarity protection, to protect from improper battery installation.
11.Lock-out function. Avoids light turn on by unexpected.
12.Location indicator help easy to find the light in dark.
13.Magnetic tail, can be used in many special occasions, use as candle light, etc.

Caution:
Please do not point the lighted flashlight to the eyes of people or animals.
Please do not cover the light head when the flashlight is on, or place the flashlight head on the ground. The radiation energy of the flashlight may cause damage to the flashlight itself, or even result in burning to other materials.
Please do not use the turbo mode continuously when the environmental temperature is high in case the flashlight body is too hot to hold. Please do not put the light with magnetic items such as bank cards and mobile phones.
Notice:
Before operating this product, please read the enclosed User Manual completely.
If the product is left unused or carried and transported, please lock the button or slightly loosen the tail thread to avoid accidentally activating the flashlight.
When the product is used in a low-temperature environment, please try and keep it warm. If the temperature is too cold, it may not affect the output and runtime.

Charging
Connect the magnetic charging cable to an external USB power source, then attach the other end of the cable to the charging port of the light (Recommeded USB power no less than 10W (5V 2A) )
The red indicator means charging, when the battery charging completed,change to blue indicator.
Rechargeable function only for one 18650 (3.6V / 3.7V) rechargeable lithium battery!
When the battery is incorrectly insert the light,charging will damage the charging circuit.

Related Projects