DS20 18650 EDC LED flashlight
LED: CREE XM-L2
Max output: 480 Lumens
Max runtime:240 hrs
Max beam distance: 123 meters
Max peak beam intensity: 3800cd
Impact resistant: 1.5 Meter
Battery: 1×18650 or 2x CR123A,2x RCR123
Rated Range: 3V ~ 9V
Head diameter 24mm/0.94inch
Body diameter 22.8mm/0.9inch
Weight: 55g / 1.9oz (without battery)
Accessories: Clip, lanyard, magnet replace O-ring, Operator’s manual, Warranty card, Spare O-ring
Optional Accessories: Headband,Battery,Battery Charger
1. Super bright & lastest CREE XM-L2 LED, High-performance, High-efficiency and energy conservation.
2. Durable aluminum vacuum plating reflector, Efficiency reflection, perfect beamshot, excellent structure
and temperature resistance.
3. Toughened ultra-clear glass lens with 99% luminousness anti-reflective coating.
4. Rugged indestructible aluminum body with anti-scratching type III hard anodization.
5. Multi-level dissipating heat design, excellent heat dissipation. Flashlight head integrated construction, high
6. Side switch button to transferring mode user-friendly interface to adjust output.
7. Four output levels and strobe, suitable for different environment.
8. Wide input range provides more choices of batteries.
9. Automatic memory function, remember bast used setting and can be preset to specific output mode
for instant access.
10. Reverse polarity protection, to protect from improper battery installation.
11. Low-voltage prompts function, the light will flash when the battery is low, remind user replace the battery
12. Engineered anti-slip knurling for a tightly firm grip.
13. Dual recoil absorbing springs, battery impact resistance.
14. Tail stand as a candle-light.
15. Tail hand hole design for lanyard use, to prevent accidental dropping.]
1. Battery installation & Replace magnet: Insert the battery into the flashlight,the battery positive pole
toward the light head. Ensure batteries are inserted correctly,the flashlight will not operate with
incorrectly inserted batteries. Ensure when the light turning on,the beam is directed away from the eyes.
When take the light with Bankcards(magnetic) or Cell phone,should replaced Magnet with O-ring.
2. Flashlight turning on/off: When the flashlight was OFF status:
Press the side switch to memorized brightness level.
Press and hold the side switch 0.5 second,to low mode.
Quickly double press side switch to turbo mode.
When the flashlight was ON(any mode) status:
Press and hold the side switch 0.5 second to turn off.
3. Brightness & mode selection: Brightness level:
Press side switch to Low-Mid-High-Turbo, cycle.
Quickly double press the side switch to Strobe (10Hz),Press side switch back to previous brightness level.
4. Low voltage indication
When the battery voltage drop down,the red indicator will blink twice every seconds.
No download for this product now.
Skilhunt DS10 (1xCR123A/RCR), DS15 (1xAA/14500), DS20 (1×18650) XM-L2 Review: BEAMS+
REVIEW: SKILHUNT DS15
REVIEW: SKILHUNT DS15
EDC 新期待 性价比之王 — 【Skilhunt DS15 首评】