H03 SE Series Special Edition LED headlamp


H03 SE / H03R SE / H03F SE LED headlamp

Max output: ANSI 1000 Lumens / 1200 LED Lumens
Max runtime: Few months
Max beam distance: 123 meters / 145 Meters
Max peak beam intensity: 3800cd /5300cd
Waterproof: IPX-8
Impact resistant: 1 Meter
Battery: 1×18650 , 2x CR123A , 2x RCR123A
Rated Range: 2.7V ~ 8.4V

Length 99.9mm / 3.93 inch
Head diameter 23.5mm / 0.93 inch
Body diameter 21.6mm/0.85 inch

Weight: 44g / 1.55oz (without battery)
Accessories: Headband, clip, lanyard, magnet replace rubber pad, Operator’s manual, Warranty card, Spare O-ring


1. Battery installation & Replace magnet: Insert the battery into the flashlight,the battery positive pole toward the light head.
Ensure batteries are inserted correctly, the flashlight will not operate with incorrectly inserted batteries. Ensure when the light turning on,the beam is directed away from the eyes.
When take the light with Bankcards(magnetic) or Cell phone,should replaced Magnet with rubber pad.

2. Flashlight turning on/off:
When side switch without lock-out, hold press switch 5 seconds to transfer between A/B mode group.

Mode Group A (8 output level & 3 strobe)
When the flashlight was OFF status:
Click switch to memorized brightness level before the light was turned off.
Quickly double click switch to Turbo(T1).Quickly triple click switch to Strobe mode.Press switch 0.5 second to Low mode.
When the flashlight was ON(any mode) status:
Press switch 0.5 second to turn off.
Change brightness level: Click switch to L – M – H – T – H – M – L, cycle.
Quickly double click switch to Sub-level(i.e. between L1 & L2),turn off memorized.
Quickly triple click switch to Strobe (S1),then double-click to switch S1/S2/S3 mode,
Click switch back to previous brightness level.

Mode Group B (5 output level & SOS)
When the flashlight was OFF status:
Click switch to memorized brightness level. Press switch 0.5 sec,to L2.
Quickly double click switch to Turbo(T1) mode.

When the flashlight was ON(any mode) status:
Click switch to turn off.

Brightness level:
Press and hold the switch to automatically cycle as L1-M1-H2-H1-T1-H1-H2-M1-L1, the level is selected when the side switch has been released.
Quickly double click switch to SOS mode,click switch to turn off.

Low voltage indication
When the battery voltage drop down lower than 3.3V, indicator flash twice every 2 seconds. Battery voltage drop down to lower than 3V, indicator flash 3 times every second.

Location indicator & Lock-out function:
When turn off the flashlight, press switch 1.5 seconds, location indicator switch on and lock-out function activation at the same time, Press button onl can switch the indicator on/off.
The indicator light flash every second, locate the flashlight, easy find the flashlight in the dark quickly. Hold press the switch 1.5 seconds, switch button unlock and enter into low mode.

1. Super bright & latest CREE XML-2 U4 LED, Max 1200 LED lumens. High-Performance, High-Efficiency and energy conservation.
2. Bead surface lens ,wide and uniform flood beamshot.
3. Flat tail cap with strong magnet to secure to ferrous surfaces.
4. Rugged indestructible aluminum body with anti-scratching type III hard anodization
5. Multi-level dissipating heat design and new copper starboard, excellent heat dissipation. Flashlight head integrated construction, high thermal conductivity.
6. Side switch button to transferring mode user-friendly interface to adjust output.
7. Eight output levels and three Strobe, suitable for different environment.
8. Wide input range provides more choices of batteries. High efficiency driver circuit, no visible flash in any mode.
9. Automatic memory function, remember last used setting and can be preset to specific output mode for instant access.
10. Reverse polarity protection, to protect from improper battery installation.
11. Low-voltage prompts function, the light will flash when the battery is low, remind user replace the battery on time.
12. Engineered anti-slip knurling for a tightly firm grip.
13. Dual recoil absorbing springs, better impact resistance.
14. Tail stand as a candle-light.
15. New intelligent temperature control technology for headlamp stable and safe use
16. Low standby current below 0.5uA
17. New side switch lock-out function.

no download info now

Related Projects